OEM Part NO. 3V-3255 / 3V3255 ROCK BUCKET GROUP

HOME :: Parts EPC :: OEM Part NO. 3V-3255 / 3V3255 ROCK BUCKET GROUP

Product Name: 3V3255ROCK BUCKET GROUP

Model: 992C Wheel Loader

Section: Implements

Group: 992C WHEEL LOADER 3412 ENGINE

Note: 3V3255 ROCK BUCKET GROUP--9.6 cubic meters (12.50 cubic yards)--4600 mm (181 in.) Wide--Modulock Edge System--Replaced by 5V5386 shown on Page 298C3V3254 Bucket parts are shown on Page 297. NOTE: 8V1405 PLATE IS AVAILABLE TO PROVIDE A STRONGER CUTTING EDGE WELD JOINTREFER TO LIST ON PAGE 299 FOR GROUND ENGAGING TOOLS. AN ATTACHMENT

Get a Quote

Description

Product Name: 3V3255ROCK BUCKET GROUP

Category: Hydraulic System

Remark: 3V3255 ROCK BUCKET GROUP--9.6 cubic meters (12.50 cubic yards)--4600 mm (181 in.) Wide--Modulock Edge System--Replaced by 5V5386 shown on Page 298C3V3254 Bucket parts are shown on Page 297. NOTE: 8V1405 PLATE IS AVAILABLE TO PROVIDE A STRONGER CUTTING EDGE WELD JOINTREFER TO LIST ON PAGE 299 FOR GROUND ENGAGING TOOLS. AN ATTACHMENT

Model: 992C Wheel Loader

Section: Array

Group: 992C WHEEL LOADER 3412 ENGINE

IE type: I

Is arrangement: N

Is change: N

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

13V3254OEM Part NO. 3V-3254 / 3V3254 ROCK LOADING BUCKET ASSEMBLY- / -1YNYNI-
29J4558OEM Part NO. 9J-4558 / 9J4558 PIN- / -18YNY---
39J9973OEM Part NO. 9J-9973 / 9J9973 CUTTING EDGE (R.H.)- / -3YYY---
49J6836OEM Part NO. 9J-6836 / 9J6836 PLATE 41.28 mm(1.625 in.) thick- / -2YYY--41.28MM 1.625IN THK
59J9960OEM Part NO. 9J-9960 / 9J9960 PLATE 34.92 mm(1.375 in.) thick- / -2YYY--34.92MM 1.375IN THK
68J4974OEM Part NO. 8J-4974 / 8J4974 PLATE 41.28 mm(1.625 in.) thick- / -3YYY--41.28MM 1.625IN THK
78J9854OEM Part NO. 8J-9854 / 8J9854 CUTTING EDGE 2.89 cm(1.38 in.) thick- / -3YYY--34.92MM 1.375IN THK
89J4553OEM Part NO. 9J-4553 / 9J4553 TIP 32.99 cm(12.99 in.) long- / -9YYY---
98J3960OEM Part NO. 8J-3960 / 8J3960 COVER- / -9YYY---
108J3962OEM Part NO. 8J-3962 / 8J3962 CUTTING EDGE (center)- / -2YYY---
119J9974OEM Part NO. 9J-9974 / 9J9974 CUTTING EDGE (L.H.)- / -3YYY---
122J3507OEM Part NO. 2J-3507 / 2J3507 NUT-JACKSCREW LOCKNUT- / -28YNY--1-8-THD
133V3219OEM Part NO. 3V-3219 / 3V3219 PLATE-WEAR- / -2YNY---
149J4552OEM Part NO. 9J-4552 / 9J4552 TIP (long)- / -9YYY---
159J4551OEM Part NO. 9J-4551 / 9J4551 TIP (short)- / -9YYY---
163G9559OEM Part NO. 3G-9559 / 3G9559 RETAINER-G.E.T.- / -22YYY---
179J4559OEM Part NO. 9J-4559 / 9J4559 TIP (penetration)- / -9YYY---
189J8441OEM Part NO. 9J-8441 / 9J8441 PIN-G.E.T.- / -4YYY---
198J4143OEM Part NO. 8J-4143 / 8J4143 PROTECTOR-SIDE BAR- / -2YYY---
204J9208OEM Part NO. 4J-9208 / 4J9208 BOLT (cutting edge end bits)- / -28YYY--1-8X3.5-IN
214J9058OEM Part NO. 4J-9058 / 4J9058 BOLT (8.26 cm(3.25 in.) long- / -28YYY--BOLT
223K5234OEM Part NO. 3K-5234 / 3K5234 WASHER 6.35 mm(.250 in.) thick- / -28YNY--28X49X6-MM THK

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

13V3254OEM Part NO. 3V-3254 / 3V3254 ROCK LOADING BUCKET ASSEMBLY- / -1YNYNI-
29J4558OEM Part NO. 9J-4558 / 9J4558 PIN- / -18YNY---
39J9973OEM Part NO. 9J-9973 / 9J9973 CUTTING EDGE (R.H.)- / -3YYY---
49J6836OEM Part NO. 9J-6836 / 9J6836 PLATE 41.28 mm(1.625 in.) thick- / -2YYY--41.28MM 1.625IN THK
59J9960OEM Part NO. 9J-9960 / 9J9960 PLATE 34.92 mm(1.375 in.) thick- / -2YYY--34.92MM 1.375IN THK
68J4974OEM Part NO. 8J-4974 / 8J4974 PLATE 41.28 mm(1.625 in.) thick- / -3YYY--41.28MM 1.625IN THK
78J9854OEM Part NO. 8J-9854 / 8J9854 CUTTING EDGE 2.89 cm(1.38 in.) thick- / -3YYY--34.92MM 1.375IN THK
89J4553OEM Part NO. 9J-4553 / 9J4553 TIP 32.99 cm(12.99 in.) long- / -9YYY---
98J3960OEM Part NO. 8J-3960 / 8J3960 COVER- / -9YYY---
108J3962OEM Part NO. 8J-3962 / 8J3962 CUTTING EDGE (center)- / -2YYY---
119J9974OEM Part NO. 9J-9974 / 9J9974 CUTTING EDGE (L.H.)- / -3YYY---
122J3507OEM Part NO. 2J-3507 / 2J3507 NUT-JACKSCREW LOCKNUT- / -28YNY--1-8-THD
133V3219OEM Part NO. 3V-3219 / 3V3219 PLATE-WEAR- / -2YNY---
149J4552OEM Part NO. 9J-4552 / 9J4552 TIP (long)- / -9YYY---
159J4551OEM Part NO. 9J-4551 / 9J4551 TIP (short)- / -9YYY---
163G9559OEM Part NO. 3G-9559 / 3G9559 RETAINER-G.E.T.- / -22YYY---
179J4559OEM Part NO. 9J-4559 / 9J4559 TIP (penetration)- / -9YYY---
189J8441OEM Part NO. 9J-8441 / 9J8441 PIN-G.E.T.- / -4YYY---
198J4143OEM Part NO. 8J-4143 / 8J4143 PROTECTOR-SIDE BAR- / -2YYY---
204J9208OEM Part NO. 4J-9208 / 4J9208 BOLT (cutting edge end bits)- / -28YYY--1-8X3.5-IN
214J9058OEM Part NO. 4J-9058 / 4J9058 BOLT (8.26 cm(3.25 in.) long- / -28YYY--BOLT
223K5234OEM Part NO. 3K-5234 / 3K5234 WASHER 6.35 mm(.250 in.) thick- / -28YNY--28X49X6-MM THK

Parts EPC Caterpillar Parts Hydraulic System

Phone:
Email:

Products

Fit for Caterpillar | For Hitachi | For Volvo | For Doosan
Controller | Hydraulic
Excavator Parts
Hydraulic Unit
Diesel Engine

Parts EPC

HOW CAN WE HELP

(Any references to trademarks, names, descriptions, numbers, and symbols on our website are utilized for reference purposes only. All trademarks pertaining to original equipment manufacturers are duly registered trademarks of the respective original equipment manufacturers. Our website explicitly disclaims any direct association or affiliation with the manufacturers listed. The use of manufacturers' names and descriptions is strictly for reference purposes and does not imply any endorsement or sponsorship.)