OEM Part NO. 3N-2811 / 3N2811 ALTERNATOR AND MOUNTING GROUP

HOME :: Parts EPC :: OEM Part NO. 3N-2811 / 3N2811 ALTERNATOR AND MOUNTING GROUP

Product Name: 3N2811ALTERNATOR AND MOUNTING GROUP

Model: D348 Marine Engine

Section: Starting And Electrical System

Group: D346 MARINE ENGINE

Note: 3N2811 ALTERNATOR GROUP--30 or 32 Volt, 50 AmpereReplaced by 3N7607 shown on Page 65A-3. Serial No. 40J246-Up. FOR USE WITH ENCLOSEDCLUTCH, FRONT POWER TAKE-OFF STUB SHAFT OR RADIATOR AND FAN DRIVE. 1N8509 Wiringand 1N9406 Alternator parts are shown on Pages 65B, 67C and 67D

Get a Quote

Description

Product Name: 3N2811ALTERNATOR AND MOUNTING GROUP

Category: Electric System / Bucket

Remark: 3N2811 ALTERNATOR GROUP--30 or 32 Volt, 50 AmpereReplaced by 3N7607 shown on Page 65A-3. Serial No. 40J246-Up. FOR USE WITH ENCLOSEDCLUTCH, FRONT POWER TAKE-OFF STUB SHAFT OR RADIATOR AND FAN DRIVE. 1N8509 Wiringand 1N9406 Alternator parts are shown on Pages 65B, 67C and 67D

Model: D348 Marine Engine | D348 Marine Engine

Section: Array | Array

Group: D346 MARINE ENGINE

IE type: I

Is arrangement: N

Is change: N

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

11B4331OEM Part NO. 1B-4331 / 1B4331 NUT-ROPS MOUNTING BRACKET TO FENDER REAR- / -1YNY--NUT
21N9406OEM Part NO. 1N-9406 / 1N9406 ALTERNATOR GP-CHARGING- / -1YYYYIALTERNATOR GROUP
31N9309OEM Part NO. 1N-9309 / 1N9309 BRACKET- / -1YNY---
41N9333OEM Part NO. 1N-9333 / 1N9333 BRACKET ASSEM.- / -1YNY---
56L6175OEM Part NO. 6L-6175 / 6L6175 PULLEY (Small)- / -1YNY---
62N0159OEM Part NO. 2N-0159 / 2N0159 VEE BELT SET (Consists of 2 Belts)- / -1YYY---
73N3139OEM Part NO. 3N-3139 / 3N3139 STRAP- / -1YNY---
81N9334OEM Part NO. 1N-9334 / 1N9334 BRACKET ASSEM.- / -1YNY---
90L0639OEM Part NO. 0L-0639 / 0L0639 BOLT (2.25" long)- / -1YNY--3/8-24X2.25-IN
101N8522OEM Part NO. 1N-8522 / 1N8522 WIRING DIAGRAM (grd. system)- / -1NNY---
111N8523OEM Part NO. 1N-8523 / 1N8523 WIRING DIAGRAM (Insulated)- / -1NNY---
121N8509OEM Part NO. 1N-8509 / 1N8509 WIRING GP-ALTERNATOR- / -1YYYNL-
131N9846OEM Part NO. 1N-9846 / 1N9846 BUSHING- / -2YNY---
145L1647OEM Part NO. 5L-1647 / 5L1647 INSULATOR- / -6YYY---
150S1748OEM Part NO. 0S-1748 / 0S1748 BOLT (2" LONG)- / -1YNY--3/8-24X2-IN
164B4285OEM Part NO. 4B-4285 / 4B4285 WASHER 3.175 mm(.125 in.)thick- / -2YNY--27X51X3.5-MM THK
171B4203OEM Part NO. 1B-4203 / 1B4203 NUT SUPPORT TO STARTING ENGINE CYLINDER BLOCK- / -2YNY--3/8-24 THD
180S1595OEM Part NO. 0S-1595 / 0S1595 BOLT,MACHINE SUPPORT AND DAMPER ASSEMBLY MOUNTING- / -1YNY--1/2-13X1.25-IN
198M7892OEM Part NO. 8M-7892 / 8M7892 AMMETER (use as required)- / -1YNYNI60A
200S1590OEM Part NO. 0S-1590 / 0S1590 BOLT (2" Long - Location "C")- / -3YNY--3/8-16X2-IN
213B4508OEM Part NO. 3B-4508 / 3B4508 LOCKWASHER (1/2") TRANSFER GEAR CASE TO FRAME MOUNTING- / -1YYY--LOCKWASHER 1/2"
224B4278OEM Part NO. 4B-4278 / 4B4278 WASHER (Not shown -- bottom of Battery Box to L.H. Fender)- / -13YYY--LARGE
233B4506OEM Part NO. 3B-4506 / 3B4506 LOCKWASHER (3/8") TRANSMISSION HOUSING TO FLYWHEEL HOUSING- / -12YYY--LOCKWASHER 3/8"
243B4512OEM Part NO. 3B-4512 / 3B4512 LOCKWASHER (3/4") TRANSFER GEAR CASE TO FRAME MOUNTING- / -1YYY--LOCKWASHER
252A1538OEM Part NO. 2A-1538 / 2A1538 BOLT-(3/4" x 2-1/4")-ROPS MOUNTING BRACKET TO FENDER- / -1YNY--3/4-10X2.25-IN
260S1591OEM Part NO. 0S-1591 / 0S1591 BOLT--BETWEEN CASE AND REAR SUPPORT OF LOADER FRAME- / -1YNY--3.81CM 1.5IN LG
276B0933OEM Part NO. 6B-0933 / 6B0933 SPACER (.75" Outside Diameter)- / -5YNY--10.31X19.05X6.35-MM THK
281D4717OEM Part NO. 1D-4717 / 1D4717 NUT-PLATE AND ANGLE ASSEMBLY TO HYDRAULIC AND FUEL TANKS- / -3YNY--NUT
292M0849OEM Part NO. 2M-0849 / 2M0849 WASHER-RETAINER TO FAN BRACKET ASSEMBLY- / -1YYY--13.49MM .531IN ID
300S1594OEM Part NO. 0S-1594 / 0S1594 BOLT--FASTENING OF 1V3461 PLATE ASSEM. TO THE KICKPLATE- / -4YNY--3/8-16X1IN
311A2029OEM Part NO. 1A-2029 / 1A2029 BOLT (1-1/8") TUBE ASSEMBLY TO TRANSFER DRIVE CASE- / -2YNY--1.125IN 28.58MM LONG

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

11B4331OEM Part NO. 1B-4331 / 1B4331 NUT-ROPS MOUNTING BRACKET TO FENDER REAR- / -1YNY--NUT
21N9406OEM Part NO. 1N-9406 / 1N9406 ALTERNATOR GP-CHARGING- / -1YYYYIALTERNATOR GROUP
31N9309OEM Part NO. 1N-9309 / 1N9309 BRACKET- / -1YNY---
41N9333OEM Part NO. 1N-9333 / 1N9333 BRACKET ASSEM.- / -1YNY---
56L6175OEM Part NO. 6L-6175 / 6L6175 PULLEY (Small)- / -1YNY---
62N0159OEM Part NO. 2N-0159 / 2N0159 VEE BELT SET (Consists of 2 Belts)- / -1YYY---
73N3139OEM Part NO. 3N-3139 / 3N3139 STRAP- / -1YNY---
81N9334OEM Part NO. 1N-9334 / 1N9334 BRACKET ASSEM.- / -1YNY---
90L0639OEM Part NO. 0L-0639 / 0L0639 BOLT (2.25" long)- / -1YNY--3/8-24X2.25-IN
101N8522OEM Part NO. 1N-8522 / 1N8522 WIRING DIAGRAM (grd. system)- / -1NNY---
111N8523OEM Part NO. 1N-8523 / 1N8523 WIRING DIAGRAM (Insulated)- / -1NNY---
121N8509OEM Part NO. 1N-8509 / 1N8509 WIRING GP-ALTERNATOR- / -1YYYNL-
131N9846OEM Part NO. 1N-9846 / 1N9846 BUSHING- / -2YNY---
145L1647OEM Part NO. 5L-1647 / 5L1647 INSULATOR- / -6YYY---
150S1748OEM Part NO. 0S-1748 / 0S1748 BOLT (2" LONG)- / -1YNY--3/8-24X2-IN
164B4285OEM Part NO. 4B-4285 / 4B4285 WASHER 3.175 mm(.125 in.)thick- / -2YNY--27X51X3.5-MM THK
171B4203OEM Part NO. 1B-4203 / 1B4203 NUT SUPPORT TO STARTING ENGINE CYLINDER BLOCK- / -2YNY--3/8-24 THD
180S1595OEM Part NO. 0S-1595 / 0S1595 BOLT,MACHINE SUPPORT AND DAMPER ASSEMBLY MOUNTING- / -1YNY--1/2-13X1.25-IN
198M7892OEM Part NO. 8M-7892 / 8M7892 AMMETER (use as required)- / -1YNYNI60A
200S1590OEM Part NO. 0S-1590 / 0S1590 BOLT (2" Long - Location "C")- / -3YNY--3/8-16X2-IN
213B4508OEM Part NO. 3B-4508 / 3B4508 LOCKWASHER (1/2") TRANSFER GEAR CASE TO FRAME MOUNTING- / -1YYY--LOCKWASHER 1/2"
224B4278OEM Part NO. 4B-4278 / 4B4278 WASHER (Not shown -- bottom of Battery Box to L.H. Fender)- / -13YYY--LARGE
233B4506OEM Part NO. 3B-4506 / 3B4506 LOCKWASHER (3/8") TRANSMISSION HOUSING TO FLYWHEEL HOUSING- / -12YYY--LOCKWASHER 3/8"
243B4512OEM Part NO. 3B-4512 / 3B4512 LOCKWASHER (3/4") TRANSFER GEAR CASE TO FRAME MOUNTING- / -1YYY--LOCKWASHER
252A1538OEM Part NO. 2A-1538 / 2A1538 BOLT-(3/4" x 2-1/4")-ROPS MOUNTING BRACKET TO FENDER- / -1YNY--3/4-10X2.25-IN
260S1591OEM Part NO. 0S-1591 / 0S1591 BOLT--BETWEEN CASE AND REAR SUPPORT OF LOADER FRAME- / -1YNY--3.81CM 1.5IN LG
276B0933OEM Part NO. 6B-0933 / 6B0933 SPACER (.75" Outside Diameter)- / -5YNY--10.31X19.05X6.35-MM THK
281D4717OEM Part NO. 1D-4717 / 1D4717 NUT-PLATE AND ANGLE ASSEMBLY TO HYDRAULIC AND FUEL TANKS- / -3YNY--NUT
292M0849OEM Part NO. 2M-0849 / 2M0849 WASHER-RETAINER TO FAN BRACKET ASSEMBLY- / -1YYY--13.49MM .531IN ID
300S1594OEM Part NO. 0S-1594 / 0S1594 BOLT--FASTENING OF 1V3461 PLATE ASSEM. TO THE KICKPLATE- / -4YNY--3/8-16X1IN
311A2029OEM Part NO. 1A-2029 / 1A2029 BOLT (1-1/8") TUBE ASSEMBLY TO TRANSFER DRIVE CASE- / -2YNY--1.125IN 28.58MM LONG

Parts EPC Caterpillar Parts Electric System Bucket

Phone:
Email:

Products

Fit for Caterpillar | For Hitachi | For Volvo | For Doosan
Controller | Hydraulic
Excavator Parts
Hydraulic Unit
Diesel Engine

Parts EPC

HOW CAN WE HELP

(Any references to trademarks, names, descriptions, numbers, and symbols on our website are utilized for reference purposes only. All trademarks pertaining to original equipment manufacturers are duly registered trademarks of the respective original equipment manufacturers. Our website explicitly disclaims any direct association or affiliation with the manufacturers listed. The use of manufacturers' names and descriptions is strictly for reference purposes and does not imply any endorsement or sponsorship.)