OEM Part NO. 3Q-9265 / 3Q9265 CONTROL GP-BULLDOZER HYDRAULIC

Tonkee OEM excavator parts

HOME Payment Shipping SITEMAP

HOME Products Parts EPC NEWS About us Contact us

HOME :: Parts EPC :: OEM Part NO. 3Q-9265 / 3Q9265 CONTROL GP-BULLDOZER HYDRAULIC

OEM Part NO. 3Q-9265 / 3Q9265 CONTROL GP-BULLDOZER HYDRAULIC

Product Name: 3Q9265CONTROL GP-BULLDOZER HYDRAULIC

Category: Cabin

Model: 12H NA Motor Grader

Section: Operator Station

Group: 12H Motor Grader, Powered By C-9 Engine

Note: 3Q-9265 CONTROL GP-BULLDOZER HYDRAULIC S/N 1251-UP LIFT & TILT PART OF 3Q-9351 BULLDOZER AR-LIFT & TILT AN ATTACHMENT

Get a Quote

Description

Product Name: 3Q9265CONTROL GP-BULLDOZER HYDRAULIC

Category: Cabin

Remark: 3Q-9265 CONTROL GP-BULLDOZER HYDRAULIC S/N 1251-UP LIFT & TILT PART OF 3Q-9351 BULLDOZER AR-LIFT & TILT AN ATTACHMENT

Model: 12H NA Motor Grader | 12H NA Motor Grader | 12H NA Motor Grader | 12H NA Motor Grader | 12H NA Motor Grader

Section: Array

Group: 12H Motor Grader, Powered By C-9 Engine

Is service: Y

CCR: N

Is Filter: N

Is Maint: N

NPR: N

IE type: I

Is arrangement: N

Is change: N

Part Modifer: (BLADE LIFT & TILT)

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

18W0456OEM Part NO. 8W-0456 / 8W0456 SHAFT- / -2YNY---
28T0076OEM Part NO. 8T-0076 / 8T0076 CONNECTOR-SPECIAL- / -2YNY---
37X0289OEM Part NO. 7X-0289 / 7X0289 BOLT (3/8)- / -1YNY--3/8-16X1.875-IN
48T9101OEM Part NO. 8T-9101 / 8T9101 BOLT (3/8) (70MM LONG)- / -2YNY--3/8-16X2.75-IN
51129164OEM Part NO. 112-9164 / 1129164 BOOT- / -2YYY---
61004336OEM Part NO. 100-4336 / 1004336 CLIP- / -1YYY--LOOP
71010509OEM Part NO. 101-0509 / 1010509 SEAL-INTEGRAL- / -2YYY---
89R8870OEM Part NO. 9R-8870 / 9R8870 BLOCK- / -1YYY---
91070547OEM Part NO. 107-0547 / 1070547 VALVE GP-CONTROL- / -1YNYNIPLOW, BULLDOZER LIFT
101348221OEM Part NO. 134-8221 / 1348221 BOLT-HEX HEAD- / -3YNY--M10X1.5X120-MM
111070545OEM Part NO. 107-0545 / 1070545 VALVE GP-CONTROL- / -1YNYNIRIPPER
128T9378OEM Part NO. 8T-9378 / 8T9378 BOLT (3/8)- / -1YNY--3/8-16X4-IN
138X4277OEM Part NO. 8X-4277 / 8X4277 ROD AS- / -2YNY---
141460705OEM Part NO. 146-0705 / 1460705 ROD- / -4YNY--775MM
158L8598OEM Part NO. 8L-8598 / 8L8598 ROD END-BEARING- / -4YYY--LH THD
161031597OEM Part NO. 103-1597 / 1031597 LEVER- / -1YNY--PLOW, BULLDOZER ANGLE
178T7008OEM Part NO. 8T-7008 / 8T7008 BOLT (3/8 X 16 X 3IN)- / -1YNY--3/8-16X3-IN
181222340OEM Part NO. 122-2340 / 1222340 CONNECTOR- / -1YNY---
195D2645OEM Part NO. 5D-2645 / 5D2645 CLAMP- / -4YNY---
201081610OEM Part NO. 108-1610 / 1081610 CLAMP- / -2YNY---
211078143OEM Part NO. 107-8143 / 1078143 HOSE AS- / -1YYY---
221140026OEM Part NO. 114-0026 / 1140026 HOSE AS- / -1YYY---
233Q9282OEM Part NO. 3Q-9282 / 3Q9282 VALVE GP-CONTROL- / -1NNNNLFRONT BLADE LIFT
241670287OEM Part NO. 167-0287 / 1670287 CONTROL GP-BULLDOZER HYDRAULIC- / -1NNYNLFRONT BLADE LIFT
251405389OEM Part NO. 140-5389 / 1405389 HOSE AS- / -1NYY---
261670371OEM Part NO. 167-0371 / 1670371 HOSE AS- / -1NYY---
273Q8033OEM Part NO. 3Q-8033 / 3Q8033 KNOB- / -1NYY--FRONT BLADE
283Q8032OEM Part NO. 3Q-8032 / 3Q8032 KNOB- / -1NYY--FRONT BLADE
293Q9324OEM Part NO. 3Q-9324 / 3Q9324 HOSE AS- / -1NYY---
301805453OEM Part NO. 180-5453 / 1805453 HOSE AS- / -1YYY---
312079061OEM Part NO. 207-9061 / 2079061 HOSE AS- / -1NYY---
326V8186OEM Part NO. 6V-8186 / 6V8186 NUT-FULL (LARGE)- / -4YNY--5/16-24-THD
333K0360OEM Part NO. 3K-0360 / 3K0360 SEAL PILOT MANIFOLD ON- / -8YYY--16.36MM ID
346V8397OEM Part NO. 6V-8397 / 6V8397 SEAL (LATER MACHINES AND FIELD INSTALLED)- / -6YYY--9.27MM ID
353B8489OEM Part NO. 3B-8489 / 3B8489 LUBE FITTING, 1/8" N.P.T. str.- / -4YYY--1/8-27 THD
366V8723OEM Part NO. 6V-8723 / 6V8723 ELBOW-90 DEGREE (3/4-16 THD)- / -2YNY--3/4-16 THD
374L9337OEM Part NO. 4L-9337 / 4L9337 BOLT 3.81 mm(1.50 in.) long- / -2YNY--3/8-16X1.5-IN
382K4973OEM Part NO. 2K-4973 / 2K4973 LOCKNUT-INSIDE GUARD ASSEMBLY- / -2YYY--3/8-16-THD
395P1075OEM Part NO. 5P-1075 / 5P1075 WASHER (Plate to top of Front Bracket)- / -1YNY--10.2X22.5X3-MM THK
403B8485OEM Part NO. 3B-8485 / 3B8485 FITTING 45 degrees ANGLE USE AS REQUIRED- / -1YNY--BELT TIGHTENER
418T4896OEM Part NO. 8T-4896 / 8T4896 WASHER (FOR TILT PORTS ON VALVE)- / -2YYY--10.2X18.5X2.5-MM THK
423F9556LOCKWASHER (Internal tooth)- / -4YYY--8.4MM ID
435S7379OEM Part NO. 5S-7379 / 5S7379 BOLT (PLATE AS TO PLATFORM)- / -2YNY--3/8-16X0.875-IN
446V8634OEM Part NO. 6V-8634 / 6V8634 CONNECTOR-SEAL (FOR 9.52MM OD TUBE)- / -2YNY--SEAL
454S4455OEM Part NO. 4S-4455 / 4S4455 CLIP--CLIP HOSE AS. TO 5-STEM VALVE- / -2YYY--LARGE
461488374OEM Part NO. 148-8374 / 1488374 ELBOW AS- / -3YNN--90-DEG
473J1907OEM Part NO. 3J-1907 / 3J1907 SEAL TO PLUG ON VALVE ASSEMBLY & PLUGS ON MANIFOLD ASSEMBLY- / -1YYY--11.89MM ID
487H3641OEM Part NO. 7H-3641 / 7H3641 ROD END-BEARING- / -4YYY--5/16-24-THD
498X4276OEM Part NO. 8X-4276 / 8X4276 ROD- / -2YNY---
501012458OEM Part NO. 101-2458 / 1012458 LEVER- / -1YNY--BLADE TIP
518D5640OEM Part NO. 8D-5640 / 8D5640 BEARING- / -2YYY--SLEEVE
526L1962OEM Part NO. 6L-1962 / 6L1962 NUT-JAM- / -2YYY--3/8-24-THD
538T9043OEM Part NO. 8T-9043 / 8T9043 BOLT (22mm LONG)- / -4YNY--5/16-18X0.875-IN
548D5641OEM Part NO. 8D-5641 / 8D5641 BEARING (washer)- / -2YYY--THRUST
552B0941OEM Part NO. 2B-0941 / 2B0941 SPACER GUARD ASSEMBLY TO BRACKET ASSEMBLY- / -2YNY--10.5X19X19-MM THK
566D4244OEM Part NO. 6D-4244 / 6D4244 CLIP (large)- / -2YYY--LOOP LOOP
577X2543OEM Part NO. 7X-2543 / 7X2543 BOLT (M10X1.5X120MM)- / -3YNY--M10X1.5X120-MM
585P8167OEM Part NO. 5P-8167 / 5P8167 BOLT-REMOVEABLE FLOORPLATES- / -1YNY--3/8-16X0.625-IN
595P6944OEM Part NO. 5P-6944 / 5P6944 ADAPTER-STRAIGHT THREAD- / -1YNY--STRAIGHT THREAD-O RING
605P0599OEM Part NO. 5P-0599 / 5P0599 CLAMP-BAND- / -1YYY--2.3M 90.56IN.
617X0288OEM Part NO. 7X-0288 / 7X0288 BOLT (41mm LONG)- / -1YNY--3/8-16X1.625-IN

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

13Q9249OEM Part NO. 3Q-9249 / 3Q9249 LINK AS-UPPER- / -2YNY---
25L4027OEM Part NO. 5L-4027 / 5L4027 WASHER (.06" THICK)- / -22YYY--1.52-MM THK
31V6185OEM Part NO. 1V-6185 / 1V6185 PIN- / -8YNY---
48E9211OEM Part NO. 8E-9211 / 8E9211 SHIM- / -10YYY--0.8-MM THK
56Y5841OEM Part NO. 6Y-5841 / 6Y5841 EDGE-CUTTING- / -2YYY---
63Q8416OEM Part NO. 3Q-8416 / 3Q8416 CYLINDER GP-LIFT- / -1YNYNLBLADE
73Q8401OEM Part NO. 3Q-8401 / 3Q8401 CYLINDER GP-TILT- / -1NNNNLFRONT BLADE
83Q8469OEM Part NO. 3Q-8469 / 3Q8469 SHACKLE- / -2YNY---
93Q8848OEM Part NO. 3Q-8848 / 3Q8848 CHAIN- / --YNY--22 LINKS
103Q9201OEM Part NO. 3Q-9201 / 3Q9201 PLATE AS- / -1NNY---
114T6229OEM Part NO. 4T-6229 / 4T6229 BIT-END- / -2YYY---
123Q8405OEM Part NO. 3Q-8405 / 3Q8405 LINK AS-LOWER- / -1NNY---
133Q8386OEM Part NO. 3Q-8386 / 3Q8386 PLATE-KEEPER- / -2YNY---
143Q8422OEM Part NO. 3Q-8422 / 3Q8422 PLATE-SPACER- / -2YNY---
153Q8427OEM Part NO. 3Q-8427 / 3Q8427 BOLT- / -2YNY---
163Q8426OEM Part NO. 3Q-8426 / 3Q8426 SPACER- / -2YNY--32.5X45X15-MM
173Q8936OEM Part NO. 3Q-8936 / 3Q8936 PLATE AS-SWIVEL- / -1YNY---
183Q8937OEM Part NO. 3Q-8937 / 3Q8937 BLADE AS- / -1YNY---
192C9232OEM Part NO. 2C-9232 / 2C9232 PLATE- / -1NNY---
203Q9265OEM Part NO. 3Q-9265 / 3Q9265 CONTROL GP-BULLDOZER HYDRAULIC- / -1NNNYIBLADE LIFT & TILT
214F3654OEM Part NO. 4F-3654 / 4F3654 BOLT 5.08 cm(2.00 in.) long- / -18YYY--5/8-11X2-IN
222K4973OEM Part NO. 2K-4973 / 2K4973 LOCKNUT-INSIDE GUARD ASSEMBLY- / -10YYY--3/8-16-THD
231B4331OEM Part NO. 1B-4331 / 1B4331 NUT-ROPS MOUNTING BRACKET TO FENDER REAR- / -12YNY--NUT
246F5282OEM Part NO. 6F-5282 / 6F5282 BOLT 13.3 cm(5.25 in.) long-Location "A"- / -4YNY--1/2-13X5.25IN
253J6575OEM Part NO. 3J-6575 / 3J6575 BEARING- / -1YYY---
263B8485OEM Part NO. 3B-8485 / 3B8485 FITTING 45 degrees ANGLE USE AS REQUIRED- / -1YNY--BELT TIGHTENER
274K0367OEM Part NO. 4K-0367 / 4K0367 NUT REAR SUPPORT TO FRAME- / -18YNY--5/8-11-THD
288T4994OEM Part NO. 8T-4994 / 8T4994 WASHER-HARD (36.5 MM OD)- / -4YNY--20X36.5X3.5-MM THK
292D4867OEM Part NO. 2D-4867 / 2D4867 FITTING (31.8mm Long)- / -8YYY--1/8-27 PTF
305P6652OEM Part NO. 5P-6652 / 5P6652 WASHER 6.35 mm(.25 in.) thick- / -12YNY--44.5MM 1.75IN 0.D.
318T4223OEM Part NO. 8T-4223 / 8T4223 WASHER-HARD-25.5MM OD X 13.5MM ID X 3MM- / -18YYY--3MM THK
327X0368OEM Part NO. 7X-0368 / 7X0368 BOLT (3/4)- / -12YNY--3/4-10X3-IN
338T9389OEM Part NO. 8T-9389 / 8T9389 BOLT-TUBE AS. TO VALVE GP- / -18YNY--1/2-13X2.75-IN
349D6164OEM Part NO. 9D-6164 / 9D6164 BOSS- / -1YNY--3/8-16X1.44-IN
358T9378OEM Part NO. 8T-9378 / 8T9378 BOLT (3/8)- / -10YNY--3/8-16X4-IN
363B4897OEM Part NO. 3B-4897 / 3B4897 SPACER (use as required)- / -20YYY--1.531X2.875X0.049-IN THK
377K9348OEM Part NO. 7K-9348 / 7K9348 PIN- / -2YNY---
388F4102OEM Part NO. 8F-4102 / 8F4102 PLATE-SEAL- / -2NYY---
398T9399OEM Part NO. 8T-9399 / 8T9399 BOLT (3/4 X 10 X 2.25IN)- / -4YNY--3/4-10X2.25IN
402J0851OEM Part NO. 2J-0851 / 2J0851 CAP-BEARING- / -2YNY---

Part NO. 3Q9265 suitable for:

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

13Q9211OEM Part NO. 3Q-9211 / 3Q9211 BULLDOZER AR-LIFT & TILT- / -1---NI-
23Q9351OEM Part NO. 3Q-9351 / 3Q9351 BULLDOZER AR-LIFT & TILT- / -1---NI-

Parts EPC Caterpillar Parts Cabin

TONKEE PARTS

Phone:
Email:

Products

Fit for Caterpillar | For Hitachi | For Volvo | For Doosan
Controller | Hydraulic
Excavator Parts
Hydraulic Unit
Diesel Engine

Machine Arrangement

Electric System

Steering System

HOW CAN WE HELP

(Any references to trademarks, names, descriptions, numbers, and symbols on our website are utilized for reference purposes only. All trademarks pertaining to original equipment manufacturers are duly registered trademarks of the respective original equipment manufacturers. Our website explicitly disclaims any direct association or affiliation with the manufacturers listed. The use of manufacturers' names and descriptions is strictly for reference purposes and does not imply any endorsement or sponsorship.)