OEM Part NO. 5T-0410 / 5T0410 DRIVE GP-CIRCLE

Tonkee OEM excavator parts

HOME Payment Shipping SITEMAP

HOME Products Parts EPC NEWS About us Contact us

HOME :: Parts EPC :: OEM Part NO. 5T-0410 / 5T0410 DRIVE GP-CIRCLE

OEM Part NO. 5T-0410 / 5T0410 DRIVE GP-CIRCLE

Product Name: 5T0410DRIVE GP-CIRCLE

Category: Hydraulic System

Model: 14G Motor Grader

Section: Blade Controls Hydraulic Steering System

Group: 14G Motor Grader, Powered By 3306 Engine

Note: 5T-0410 DRIVE GP-CIRCLE S/N 96U7346-8013PART OF 8W-2930 BLADE AR

Get a Quote

Description

Product Name: 5T0410DRIVE GP-CIRCLE

Category: Hydraulic System

Remark: 5T-0410 DRIVE GP-CIRCLE S/N 96U7346-8013PART OF 8W-2930 BLADE AR

Model: 14G Motor Grader

Section: Array | Array

Group: 14G Motor Grader, Powered By 3306 Engine

Is service: N

CCR: N

Is Filter: N

Is Maint: N

NPR: Y

IE type: I

Is arrangement: N

Is change: N

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

18J5407OEM Part NO. 8J-5407 / 8J5407 MOTOR GP-GEROTOR- / -1YNYNICIRCLE DRIVE
22B7410OEM Part NO. 2B-7410 / 2B7410 PLUG (.50" DIAMETER)- / -1YNY--OIL DRAIN
32D8154OEM Part NO. 2D-8154 / 2D8154 STUD-TAPERLOCK-INSTALLED IN VALVE GP- / -4YYY--1/2-13X2.36-IN
41A1415OEM Part NO. 1A-1415 / 1A1415 NUT- / -1YNY--1-7/8-12-THD
58D7423OEM Part NO. 8D-7423 / 8D7423 WASHER-SPECIAL- / -1YYY--81.03X48.41X1.6MM THK
69T5976OEM Part NO. 9T-5976 / 9T5976 MOTOR GP-GEROTOR- / -1YNNNI-
71B4038OEM Part NO. 1B-4038 / 1B4038 CUP-ROLLER BEARING- / -2YYY---
89D5941OEM Part NO. 9D-5941 / 9D5941 WASHER-THRUST- / -2YYY--3.06X4.25X0.120-MM THK
91B4046OEM Part NO. 1B-4046 / 1B4046 CONE-BEARING- / -2YYY---
102G6695OEM Part NO. 2G-6695 / 2G6695 BRACKET- / -1YNY---
117D8983OEM Part NO. 7D-8983 / 7D8983 SHIM .005 in. (.1270 mm) thick- / -10YYY--0.005-IN THK
127D8984OEM Part NO. 7D-8984 / 7D8984 SHIM .007 in. (.1778 in. (.1778 mm) thick- / -6YYY--0.007-IN THK
139D1491OEM Part NO. 9D-1491 / 9D1491 COUPLING- / -1YNY---
145F5434OEM Part NO. 5F-5434 / 5F5434 VALVE AS-RELIEF- / -1YYY--AIR COMPRESSOR
158D7173OEM Part NO. 8D-7173 / 8D7173 BEARING-SLEEVE- / -1YYY---
169W6645OEM Part NO. 9W-6645 / 9W6645 SEAL GP-DUO-CONE- / -1YYY--SEAL GP-DUO CONE
179D5741OEM Part NO. 9D-5741 / 9D5741 WORM-CIRCLE DRIVE- / -1YNY---
189D5759OEM Part NO. 9D-5759 / 9D5759 COVER ASSEM.- / -1YNY---
199D5746OEM Part NO. 9D-5746 / 9D5746 GEAR (47 teeth)- / -1YNY--47 TEETH
209D5942OEM Part NO. 9D-5942 / 9D5942 BEARING-SLEEVE- / -1YYY---
219D5921OEM Part NO. 9D-5921 / 9D5921 SHAFT-DRIVE PINION- / -1YNY---
229D5943OEM Part NO. 9D-5943 / 9D5943 SPACER- / -1YNY--1.906X3.19X0.236-IN
236G4674OEM Part NO. 6G-4674 / 6G4674 PINION-CIRCLE REVERSE- / -1YNY---
242G5876OEM Part NO. 2G-5876 / 2G5876 HOUSING-DRIVE- / -1YNY---
258W5093OEM Part NO. 8W-5093 / 8W5093 PINION-CIRCLE DRIVE- / -1YNY---
262J3506OEM Part NO. 2J-3506 / 2J3506 NUT--FRONT SUPPORT ASSEMBLY TO FRAME- / -4YNY--3/4-10-THD
271H7339OEM Part NO. 1H-7339 / 1H7339 SEAL-O-RING (ID=75.79mm)- / -1YYY--75.79MM ID
286H1717OEM Part NO. 6H-1717 / 6H1717 BOLT guard to support assembly and guard assembly- / -7YNY--BOLT
291D4719OEM Part NO. 1D-4719 / 1D4719 NUT-- HANDRAIL TO PLATFORM AND FUEL TANK- / -4YNY--1/2-13-THD
300S1585OEM Part NO. 0S-1585 / 0S1585 BOLT (1-1/2") TRANSFER GEAR CASE TO FRAME MOUNTING- / -4YNY--1/2-13X1.5-IN
314D6419OEM Part NO. 4D-6419 / 4D6419 WASHER 5.56 mm(.219 in.) thick- / -2YNY--24X40X5-MM THK
320S1625OEM Part NO. 0S-1625 / 0S1625 BOLT, HEX. HD., 5/8"-11 N.C. X 2 1/4"- / -12YNY--5/8-11X2.5-IN
331B5174OEM Part NO. 1B-5174 / 1B5174 PLUG .75 in.(1.905 cm) diameter- / -1YNY--3/4-14 NPTF
345P8245OEM Part NO. 5P-8245 / 5P8245 WASHER-JACKSCREW SUPPORT TO FRONT SUPPORT- / -4YNY--13.5X25.5X3-MM THK
352H9247OEM Part NO. 2H-9247 / 2H9247 SEAL-O-RING (ID=132.94mm)- / -1YYY--OUTER
365P8248OEM Part NO. 5P-8248 / 5P8248 WASHER-ENGINE SUPPORT TO FRAME ASSEMBLY- / -4YNY--20X36.5X3.5-MM THK
371D4627OEM Part NO. 1D-4627 / 1D4627 BOLT 76.20 mm(3 in. long)- / -2YNY--7/8-9X3-IN
384F7390OEM Part NO. 4F-7390 / 4F7390 SEAL (2.10" Inside Diameter)- / -1YYY--53.34MM ID
392S5658OEM Part NO. 2S-5658 / 2S5658 WASHER .318 cm(.125 in.) thick- / -12YNY--17X29X3-MM THK
405K5288OEM Part NO. 5K-5288 / 5K5288 SEAL GROUP (Standard)- / -1YYY--STANDARD
415K5129OEM Part NO. 5K-5129 / 5K5129 RING-SEALING- / -2YYY---
425P0375OEM Part NO. 5P-0375 / 5P0375 SEAL GROUP (High Temperature)- / -1YYY--HIGH TEMP
433N3097OEM Part NO. 3N-3097 / 3N3097 RING-SEALING- / -2YYY--HIGH TEMP.
445K8454OEM Part NO. 5K-8454 / 5K8454 BOLT 2.86 cm(1.125 in.) long- / -1YYY--1/2-13X1.12-IN
453K2889OEM Part NO. 3K-2889 / 3K2889 NUT SELF LOCKING- / -12YYY--5/8-11-THD
464H6996OEM Part NO. 4H-6996 / 4H6996 PIN (2" LONG)- / -1YYY---
472D6533OEM Part NO. 2D-6533 / 2D6533 SEAL O RING- / -1YYY--304.39MM ID
481K6870OEM Part NO. 1K-6870 / 1K6870 NUT (NATIONAL COARSE)- / -4YYY--3/4-10-THD
494D7246OEM Part NO. 4D-7246 / 4D7246 STUD-TAPERLOCK- / -4YNY---

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

18W3256OEM Part NO. 8W-3256 / 8W3256 CYLINDER & MTG GP-CENTERSHIFT- / -1YNNNI-
28W8425OEM Part NO. 8W-8425 / 8W8425 BLADE GP- / -1YNNNI-
38W3337OEM Part NO. 8W-3337 / 8W3337 VALVE & LINKAGE GP- / -1YNNNI-
48W3314OEM Part NO. 8W-3314 / 8W3314 LINES GP-MOTOR- / -1YNNNI-
58W3249OEM Part NO. 8W-3249 / 8W3249 LINES GP-LIFT CYLINDER- / -1YNNNI-
68W3392OEM Part NO. 8W-3392 / 8W3392 LINES GP-HYDRAULIC- / -1YNNNI-
78W3323OEM Part NO. 8W-3323 / 8W3323 LINES GP-HYDRAULIC- / -1YNNNI-
88W3284OEM Part NO. 8W-3284 / 8W3284 LINES GP-HYDRAULIC- / -1YNNNI-
98X5301OEM Part NO. 8X-5301 / 8X5301 DRIVE GP-CIRCLE- / -1YNNNI-
108W3257OEM Part NO. 8W-3257 / 8W3257 CYLINDER & MTG GP-SIDESHIFT- / -1YNNNI-
118W3255OEM Part NO. 8W-3255 / 8W3255 CYLINDER & MTG GP-BLADE TIP- / -1YNNNI-
128W3254OEM Part NO. 8W-3254 / 8W3254 CYLINDER & MTG GP-BLADE LIFT- / -1YNNNI-
135T0410OEM Part NO. 5T-0410 / 5T0410 DRIVE GP-CIRCLE- / -1YNNNI-
146G4985OEM Part NO. 6G-4985 / 6G4985 DRAWBAR GP- / -1YNNNI-
156G4970OEM Part NO. 6G-4970 / 6G4970 CIRCLE GP- / -1YNNNI-
169D1790OEM Part NO. 9D-1790 / 9D1790 BLADE GP- / -1YNNNI-
178D5970OEM Part NO. 8D-5970 / 8D5970 LIFT GP-BLADE- / -1YNNNI-
188D5170OEM Part NO. 8D-5170 / 8D5170 CONTROL GP-CENTERSHIFT LOCK- / -1YNNNI-
198D6185OEM Part NO. 8D-6185 / 8D6185 LOCK GP-CENTERSHIFT- / -1YNNNI-

Part NO. 5T0410 suitable for:

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

18W2930OEM Part NO. 8W-2930 / 8W2930 BLADE AR- / -1NNNNL-

Parts EPC Caterpillar Parts Hydraulic System

TONKEE PARTS

Phone:
Email:

Products

Fit for Caterpillar | For Hitachi | For Volvo | For Doosan
Controller | Hydraulic
Excavator Parts
Hydraulic Unit
Diesel Engine

Machine Arrangement

Electric System

Steering System

HOW CAN WE HELP

(Any references to trademarks, names, descriptions, numbers, and symbols on our website are utilized for reference purposes only. All trademarks pertaining to original equipment manufacturers are duly registered trademarks of the respective original equipment manufacturers. Our website explicitly disclaims any direct association or affiliation with the manufacturers listed. The use of manufacturers' names and descriptions is strictly for reference purposes and does not imply any endorsement or sponsorship.)