OEM Part NO. 3P-5595 / 3P5595 RIPPER LINES GROUP

Tonkee OEM excavator parts

HOME Payment Shipping SITEMAP

HOME Products Parts EPC NEWS About us Contact us

HOME :: Parts EPC :: OEM Part NO. 3P-5595 / 3P5595 RIPPER LINES GROUP

OEM Part NO. 3P-5595 / 3P5595 RIPPER LINES GROUP

Product Name: 3P5595RIPPER LINES GROUP

Category: Hydraulic System

Model: 173B Hydraulic Control

Section: 173B Hydraulic Control

Group: D7G TRACTOR POWERSHIFT 3306 ENGINE

Note: 3P5595 RIPPER LINES GROUP--Type 2--Part 2 of 2Part of 3P4011, 3P4014, 9P195, 9G7927 and 9G7924 Hydraulic Control Arrangementslisted on Pages 216, 217, 219 and 221

Get a Quote

Description

Product Name: 3P5595RIPPER LINES GROUP

Category: Hydraulic System

Remark: 3P5595 RIPPER LINES GROUP--Type 2--Part 2 of 2Part of 3P4011, 3P4014, 9P195, 9G7927 and 9G7924 Hydraulic Control Arrangementslisted on Pages 216, 217, 219 and 221

Model: 173B Hydraulic Control | 173B Hydraulic Control

Section: Array | Array | Array

Group: D7G TRACTOR POWERSHIFT 3306 ENGINE

Is service: Y

CCR: N

Is Filter: N

Is Maint: N

NPR: Y

IE type: I

Is arrangement: N

Is change: N

Part Modifer: REAR LINES GROUP

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

13J1907OEM Part NO. 3J-1907 / 3J1907 SEAL TO PLUG ON VALVE ASSEMBLY & PLUGS ON MANIFOLD ASSEMBLY- / -6YYY--11.89MM ID
23J7354OEM Part NO. 3J-7354 / 3J7354 SEAL-O-RING-CONNECTOR TO ADAPTER- / -1YYY--8.92MM ID
38T4223OEM Part NO. 8T-4223 / 8T4223 WASHER-HARD-25.5MM OD X 13.5MM ID X 3MM- / -4YYY--3MM THK
47K1181OEM Part NO. 7K-1181 / 7K1181 STRAP USE AS REQUIRED- / -2YYY--4.00IN DIA
54J0520OEM Part NO. 4J-0520 / 4J0520 SEAL (FOR TILT PORTS ON VALVE)- / -1YYY--32.92MM ID
61P3704OEM Part NO. 1P-3704 / 1P3704 SEAL 1.494 in.(37.846 mm) I.D.- / -1YYY--38.2MM ID
74J0522OEM Part NO. 4J-0522 / 4J0522 SEAL-INTERFACE BETWEEN 3RD & TILT VALVE- / -2YYY--37.69MM ID
81P4578OEM Part NO. 1P-4578 / 1P4578 FLANGE (to oil cooler)- / -2YNY--SPLIT
95M2894OEM Part NO. 5M-2894 / 5M2894 WASHER CLIP TO TUBE ASSEMBLY (AFTERCOOLER RADIATOR INLET)- / -2YYY--9.9MM .391IN ID
101A2029OEM Part NO. 1A-2029 / 1A2029 BOLT (1-1/8") TUBE ASSEMBLY TO TRANSFER DRIVE CASE- / -1YNY--1.125IN 28.58MM LONG
119F2978OEM Part NO. 9F-2978 / 9F2978 NUT 5T2711 BRACKET TO LH RADIATOR GUARD- / -1YNY--3/8-16-THD
120S1594OEM Part NO. 0S-1594 / 0S1594 BOLT--FASTENING OF 1V3461 PLATE ASSEM. TO THE KICKPLATE- / -1YNY--3/8-16X1IN
130S0509OEM Part NO. 0S-0509 / 0S0509 BOLT--BETWEEN CASE AND SUPPORT OF LOADER FRAME (L.H. & R.H.)- / -1YNY--BOLT
146H1717OEM Part NO. 6H-1717 / 6H1717 BOLT guard to support assembly and guard assembly- / -1YNY--BOLT
151D4719OEM Part NO. 1D-4719 / 1D4719 NUT-- HANDRAIL TO PLATFORM AND FUEL TANK- / -1YNY--1/2-13-THD
163B4506OEM Part NO. 3B-4506 / 3B4506 LOCKWASHER (3/8") TRANSMISSION HOUSING TO FLYWHEEL HOUSING- / -1YYY--LOCKWASHER 3/8"
174B4278OEM Part NO. 4B-4278 / 4B4278 WASHER (Not shown -- bottom of Battery Box to L.H. Fender)- / -1YYY--LARGE
183B4508OEM Part NO. 3B-4508 / 3B4508 LOCKWASHER (1/2") TRANSFER GEAR CASE TO FRAME MOUNTING- / -1YYY--LOCKWASHER 1/2"
197B3235OEM Part NO. 7B-3235 / 7B3235 BOLT 3.49 cm (1.375 ins) long.- / -1YNY--1/2-13X1.375-IN
203B4507OEM Part NO. 3B-4507 / 3B4507 LOCKWASHER .4375 in.(11.11 mm) I.D.- / -4YYY--LEFT SIDE
210T0768BOLT--1.75 in. (44.45 mm) long- / -3YNY--7/16-14X1.75-IN
224B4281OEM Part NO. 4B-4281 / 4B4281 WASHER--USE WITH CUSTOMER'S GROUND BOLT- / -4YYY--16.8X33X2.5-MM THK
231S1015OEM Part NO. 1S-1015 / 1S1015 CONDUIT CLIP (USE AS REQUIRED)- / -1YYY--2.24CM .88IN WIDE
243B4510OEM Part NO. 3B-4510 / 3B4510 LOCKWASHER USE WITH CUSTOMER'S GROUNDING BOLT- / -4YYY--LOCKWASHER
250S1595OEM Part NO. 0S-1595 / 0S1595 BOLT,MACHINE SUPPORT AND DAMPER ASSEMBLY MOUNTING- / -1YNY--1/2-13X1.25-IN
260V0375OEM Part NO. 0V-0375 / 0V0375 BOLT (3.25" Long-Location A)- / -1YNY--1/2-13X3.25-IN
274B4280OEM Part NO. 4B-4280 / 4B4280 WASHER .095 in. (2.42 mm) thick- / -4YYY--WASHER
283H5368OEM Part NO. 3H-5368 / 3H5368 BOLT BRACKET TO STARTING ENGINE TIMING GEAR HOUSING- / -4YNY--7/16-14X1.375-IN
294B4279OEM Part NO. 4B-4279 / 4B4279 WASHER (.0625" Thick)- / -4YYY--12X23.5X1.6-MM THK
300307947OEM Part NO. 030-7947 / 0307947 ELBOW HOSE ASSEMBLY TO- / -1YNY--9/16-18 STR THD
317M7260OEM Part NO. 7M-7260 / 7M7260 LIQUID GASKET (use as required)- / --YYY--8-OZ CAN
324D3704OEM Part NO. 4D-3704 / 4D3704 WASHER .109 in. (2.77 mm) thick- / -11YNY--17X30X5-MM THK
330S1587OEM Part NO. 0S-1587 / 0S1587 BOLT-BRACKET ASSEMBLY TO TIMING GEAR- / -2YNY--1/2-13X1.75-IN
345P1075OEM Part NO. 5P-1075 / 5P1075 WASHER (Plate to top of Front Bracket)- / -2YNY--10.2X22.5X3-MM THK
352R6806OEM Part NO. 2R-6806 / 2R6806 CONNECTOR TUBE ASSEMBLY TO- / -5YNY--9/16-18 STR
360S1589OEM Part NO. 0S-1589 / 0S1589 BOLT, HEX. HD., 5/8"-11 N.C. X 1 3/4"- / -2YNY--5/8-11X1.75-IN
371A5822OEM Part NO. 1A-5822 / 1A5822 BOLT 70 MM (1/2" x 2 3/4")- COVER ASSEMBLY TO FENDER- / -1YNY--1/2-13X2.75-IN
384B4043OEM Part NO. 4B-4043 / 4B4043 BOLT 34.93 mm(1.375 in.) long- / -7YNY--5/8-11X1.375-IN
390S1592OEM Part NO. 0S-1592 / 0S1592 BOLT 1.25 in. (31.750 mm) long- / -2YNY--5/8-11X1.25-IN
400S1566OEM Part NO. 0S-1566 / 0S1566 BOLT, HEX. HD., 5/8"-11 N.C. X 1 1/2"- / -2YNY--5/8-11X1.5-IN
415P8247OEM Part NO. 5P-8247 / 5P8247 WASHER (CENTER PUMP TO FRONT PUMP)- / -7YNY--17X32X3.5-MM THK
422A1466OEM Part NO. 2A-1466 / 2A1466 GASKET-END COVER- / -1YYY---
431F5339OEM Part NO. 1F-5339 / 1F5339 LUG (3/8-16 THD)- / -1YNY--3/8-16-THD
445P8245OEM Part NO. 5P-8245 / 5P8245 WASHER-JACKSCREW SUPPORT TO FRONT SUPPORT- / -1YNY--13.5X25.5X3-MM THK
455P7213OEM Part NO. 5P-7213 / 5P7213 WASHER 2 mm(.079 in.) thick- / -1YYY--WASHER-BETWEEN WELDED NUT & TOP SWIVEL
465P8244OEM Part NO. 5P-8244 / 5P8244 WASHER--GENERATOR TO ENGINE- / -8YYY--12X22.5X2.5-MM THK
470T0319OEM Part NO. 0T-0319 / 0T0319 BOLT 2.00 in. (5.08 cm) long- / -1YNY--7/16-14X2-IN
485P0178OEM Part NO. 5P-0178 / 5P0178 HOSE 377.19 cm(148.50 in.)- / --YYY--76.6CM 30.16IN.
498S6393OEM Part NO. 8S-6393 / 8S6393 COUPLING ASSEM. ( 90 DEGREES )- / -1YNY--90 DEGREES
504S5414OEM Part NO. 4S-5414 / 4S5414 SLEEVESE- / -2YNY--SLEEVE
518P6088OEM Part NO. 8P-6088 / 8P6088 HOSE ASSEM.- / -1YYY---
522P5943OEM Part NO. 2P-5943 / 2P5943 HOSE (.375 in. I.D.) 163.50 in.- / --YYY--IN. 312 CM
538S6417OEM Part NO. 8S-6417 / 8S6417 COUPLING ASSEM. (90 degrees)- / -1YNY--STRAIGHT
544S9191OEM Part NO. 4S-9191 / 4S9191 WASHER FLANGE TO PUMP- / -4YNY--12X22.5X5-MM THK
553P4028OEM Part NO. 3P-4028 / 3P4028 PLATE ASSEM.- / -1YNY---
568S6392OEM Part NO. 8S-6392 / 8S6392 COUPLING ASSEM.- (90 degrees)- / -1YNY--90
576P6705OEM Part NO. 6P-6705 / 6P6705 HOSE ASSEM.- / -1YYY---
580303978OEM Part NO. 030-3978 / 0303978 CONNECTOR-FILTERED FUEL TO ADAPTER- / -1YNY--SMALL
595R0939OEM Part NO. 5R-0939 / 5R0939 CLIP (tab)- / -1YNY--TAB
605R0940OEM Part NO. 5R-0940 / 5R0940 CLIP (slotted)- / -1YNY--SLOT
619P2751OEM Part NO. 9P-2751 / 9P2751 BRACKET ASSEM.- / -1YNY---
623P4026OEM Part NO. 3P-4026 / 3P4026 HOSE ASSEM.- / -1YYY---
637S8920OEM Part NO. 7S-8920 / 7S8920 CLIP 11.30 cm(4.45 in.) long- / -1YNY--SLOT
647S8921OEM Part NO. 7S-8921 / 7S8921 CLIP 8.38 cm(3.48 in.) long- / -1YNY--TAB
655P0181OEM Part NO. 5P-0181 / 5P0181 HOSE (Angle Orientation 0 Degrees) 104cm- / --YYY--87.8cm
663S7252OEM Part NO. 3S-7252 / 3S7252 SLEEVE- / -2YNY--SLEEVE
679S1366OEM Part NO. 9S-1366 / 9S1366 BOLT, HEX. HD., 1/2"-13 N.C. x 2 1/2"- / -1YNY--1/2-13X2.5-IN
681H2415OEM Part NO. 1H-2415 / 1H2415 BOLT 6.35 cm (2.50 in.) long- / -1YNY--0.5-13X2.5-IN
696K6164OEM Part NO. 6K-6164 / 6K6164 CLIP 114.55 mm(4.51 in.) long- / -1YNY--SMALL
706K6167OEM Part NO. 6K-6167 / 6K6167 CLIP 170.94 mm(6.73 in.) long- / -1YNY--CURVED
714F8965OEM Part NO. 4F-8965 / 4F8965 BOLT BRACKET TO STARTING ENGINE- / -4YNY--7/16-14X1.125-IN
725P8444OEM Part NO. 5P-8444 / 5P8444 GROMMET (37mm I/D)- / -1YYY--37-MM ID
735P7468OEM Part NO. 5P-7468 / 5P7468 CLIP (SLOT - SMALL)- / -1YNY--SLOT
745P7469OEM Part NO. 5P-7469 / 5P7469 CLIP (TAB - SMALL)- / -1YNY--TAB
757X0345OEM Part NO. 7X-0345 / 7X0345 BOLT 5/8" X 1 3/4" LONG (FIRST TYPE)- / -2YNY--5/8-11X1.75-IN
767X0584OEM Part NO. 7X-0584 / 7X0584 WASHER-HARD- / -1YYY--13.5X20.5X2-MM THK
775C6565OEM Part NO. 5C-6565 / 5C6565 BOLT (1/2 X 13 X 1.125IN)- / -1YNY--1/2-13X1.125-IN
788T8920OEM Part NO. 8T-8920 / 8T8920 BOLT (83mm LONG)- / -1YNY--1/2-13X3.25-IN
795P2370OEM Part NO. 5P-2370 / 5P2370 CLIP- / -1YYY--31.8MM
807X0343OEM Part NO. 7X-0343 / 7X0343 BOLT (5/8-11X1.25IN)- / -2YNY--5/8-11X1.25-IN
818S9355OEM Part NO. 8S-9355 / 8S9355 HOSE (1.00" I.D.) 20.40"- / --YYY--43IN 109CM
828C4436OEM Part NO. 8C-4436 / 8C4436 BOLT (1/2-13X1.375IN)- / -1YNY--1/2-13X1.375IN
832H9233OEM Part NO. 2H-9233 / 2H9233 SPACER USE AS REQUIRED- / -1YNY---- USE AS REQUIRED
848T9389OEM Part NO. 8T-9389 / 8T9389 BOLT-TUBE AS. TO VALVE GP- / -1YNY--1/2-13X2.75-IN
852J8239OEM Part NO. 2J-8239 / 2J8239 ADAPTER- / -1YNY---
867X0507OEM Part NO. 7X-0507 / 7X0507 WASHER-HARD- / -4YNY--12X22.5X5-MM THK
872P1801OEM Part NO. 2P-1801 / 2P1801 STEM ASSEM ( Straight )- / -1YNY--STRAIGHT
885B0546OEM Part NO. 5B-0546 / 5B0546 SPACER- / -1YNY--0.531X1X0.438-IN THK
897X0308OEM Part NO. 7X-0308 / 7X0308 BOLT (7/16)- / -8YNY--7/16-14
906B3671OEM Part NO. 6B-3671 / 6B3671 PLATE-SCREW- / -1YNY---
917D4726OEM Part NO. 7D-4726 / 7D4726 BLOCK- / -1YNY---
927X0344OEM Part NO. 7X-0344 / 7X0344 BOLT (5/8)- / -7YNY--5/8-11X1.375-IN
932P4813OEM Part NO. 2P-4813 / 2P4813 STEM ASSEM. (90 DEGREES)- / -2YNY--90
946P7478OEM Part NO. 6P-7478 / 6P7478 BRACKET- / -1YNY---
956P3712OEM Part NO. 6P-3712 / 6P3712 HOSE ASSEM. (B Mark)- / -1YYY---
963P6021OEM Part NO. 3P-6021 / 3P6021 HOSE ASSEM.- / -1YYY---
973P6024OEM Part NO. 3P-6024 / 3P6024 HOSE ASSEM. (A Mark)- / -1YYY---
983P6023OEM Part NO. 3P-6023 / 3P6023 HOSE ASSEM. (C Mark)- / -1YYY---
996P3713OEM Part NO. 6P-3713 / 6P3713 TUBE ASSEM.- / -1YNY---
1003P6022OEM Part NO. 3P-6022 / 3P6022 HOSE ASSEM.- / -1YYY---

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

13P3279OEM Part NO. 3P-3279 / 3P3279 IMPLEMENT LINKAGE GROUP (BULLDOZER)- / -1YNYNIIMPLEMENT LINKAGE GROUP
23P3281OEM Part NO. 3P-3281 / 3P3281 HYDRAULIC TANK MOUNTING GROUP- / -1YNYYIHYDRAULIC TANK MOUNTING GROUP
38J8601OEM Part NO. 8J-8601 / 8J8601 RIPPER LIFT PILOT VALVE GROUP- / -1YNYNIVALVE GROUP
49J2918OEM Part NO. 9J-2918 / 9J2918 REAR ATTACHMENT LIFT CONTROL VALVE GROUP- / -1YNYNICONTROL VALVE GROUP
53G1773OEM Part NO. 3G-1773 / 3G1773 RIPPER CONTROL VALVE GROUP- / -1YNYNICONTROL VALVE GROUP
63P3277OEM Part NO. 3P-3277 / 3P3277 IMPLEMENT LINKAGE GROUP (RIPPER AND REAR ATTACHMENT)- / -1YNYNIIMPLEMENT LINKAGE GROUP--RIPPER
73P5599OEM Part NO. 3P-5599 / 3P5599 PUMP LINES GROUP- / -1YNYYIPUMP LINES GROUP
83P5597OEM Part NO. 3P-5597 / 3P5597 BULLDOZER LINES GROUP- / -1YNYNIBULLDOZER LINES GROUP
91U1820OEM Part NO. 1U-1820 / 1U1820 FILTER & TANK GP-HYDRAULIC- / -1YNYNITANK & VALVE GROUP
109J5058OEM Part NO. 9J-5058 / 9J5058 HYDRAULIC PUMP GROUP- / -1YNYYIPUMP GROUP
118N8601OEM Part NO. 8N-8601 / 8N8601 PULLEY GROUP-WITH SOUND SUPPRESSION- / -1YNYNIVALVE GROUP
127J4634OEM Part NO. 7J-4634 / 7J4634 HYDRAULIC PUMP ASSEMBLY- / -1YNYNIHYDRAULIC PUMP GROUP
139J7153OEM Part NO. 9J-7153 / 9J7153 HYDRAULIC TANK AND VALVE GROUP- / -1YNYYITANK AND VALVE GROUP
143P5595OEM Part NO. 3P-5595 / 3P5595 RIPPER LINES GROUP- / -1YNYYIRIPPER LINES GROUP

Part NO. 3P5595 suitable for:

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

13P4011OEM Part NO. 3P-4011 / 3P4011 HYDRAULIC CONTROL ARRANGEMENT-BULLDOZER AND RIPPER- / -1---NL-
29G7924OEM Part NO. 9G-7924 / 9G7924 HYDRAULIC CONTROL ARRANGEMENT-BULLDOZER AND RIPPER- / -1---NL-
33P4014OEM Part NO. 3P-4014 / 3P4014 HYDRAULIC CONTROL ARRANGEMENT-BULLDOZER, BLEAD TILT AND RIPPER- / -1---NL-
43P4015OEM Part NO. 3P-4015 / 3P4015 CONTROL AR-HYDRAULIC- / -1---NL-
59G7927OEM Part NO. 9G-7927 / 9G7927 HYDRAULIC CONTROL ARRANGEMENT-BULLDOZER, BLEAD TILT AND RIPPER- / -1---NL-
69G7928OEM Part NO. 9G-7928 / 9G7928 CONTROL AR-HYDRAULIC- / -1---NL-
79G7930OEM Part NO. 9G-7930 / 9G7930 CONTROL AR-HYDRAULIC- / -1---NL-
86T9581HYDRAULIC CONTROL ARRANGEMENT-CONVERSION KIT ONE TO TWO VALVE- / -1---NL-
96T9582HYDRAULIC CONTROL ARRANGEMENT-CONVERSION KIT ONE TO TWO VALVE- / -1---NL-
109P0195HYDRAULIC CONTROL ARRANGEMENT-TRIPLE VALVE- / -1---NL-

Parts EPC Caterpillar Parts Hydraulic System

TONKEE PARTS

Phone:
Email:

Products

Fit for Caterpillar | For Hitachi | For Volvo | For Doosan
Controller | Hydraulic
Excavator Parts
Hydraulic Unit
Diesel Engine

Machine Arrangement

Electric System

Steering System

HOW CAN WE HELP

(Any references to trademarks, names, descriptions, numbers, and symbols on our website are utilized for reference purposes only. All trademarks pertaining to original equipment manufacturers are duly registered trademarks of the respective original equipment manufacturers. Our website explicitly disclaims any direct association or affiliation with the manufacturers listed. The use of manufacturers' names and descriptions is strictly for reference purposes and does not imply any endorsement or sponsorship.)