OEM Part NO. 6T-7983 / 6T7983 IMPLEMENT LINKAGE GROUP (BULLDOZER AND TILT)

HOME :: Parts EPC :: OEM Part NO. 6T-7983 / 6T7983 IMPLEMENT LINKAGE GROUP (BULLDOZER AND TILT)

Product Name: 6T7983IMPLEMENT LINKAGE GROUP (BULLDOZER AND TILT)

Model: D7H Track Type Tractor

Section: Hydraulic System

Group: D7H TRACK-TYPE TRACTOR POWERSHIFT 3306 ENGINE

Note: IMPLEMENT LINKAGE (6T7983 N/S)--Bulldozer & Ripper--Part 2 of 2Part of 3T3628 and 4Y3380 Hydraulic Control ArrangementsFor use with RipperFor outside JapanAN ATTACHMENT

Get a Quote

Description

Product Name: 6T7983IMPLEMENT LINKAGE GROUP (BULLDOZER AND TILT)

Category: Hydraulic System

Remark: IMPLEMENT LINKAGE (6T7983 N/S)--Bulldozer & Ripper--Part 2 of 2Part of 3T3628 and 4Y3380 Hydraulic Control ArrangementsFor use with RipperFor outside JapanAN ATTACHMENT

Section: Array

Group: D7H TRACK-TYPE TRACTOR POWERSHIFT 3306 ENGINE

Is service: Y

CCR: N

Is Filter: N

Is Maint: N

NPR: Y

IE type: I

Is arrangement: N

Is change: N

Part Modifer: (BULLDOZER AND RIPPER)

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

17X3374OEM Part NO. 7X-3374 / 7X3374 NUT-FULL- / -1YNY--1/2-20-THD
25D1185OEM Part NO. 5D-1185 / 5D1185 ROD-CONTROL- / -1YNY--ROD
36V2867OEM Part NO. 6V-2867 / 6V2867 BOOT-ROD END- / -5YYY---
46V2866OEM Part NO. 6V-2866 / 6V2866 SPACER- / -10YNY---
57V5002OEM Part NO. 7V-5002 / 7V5002 CLIP- / -1YNY---
66V3294OEM Part NO. 6V-3294 / 6V3294 BOOT-ROD END- / -1YYY---
73T7376OEM Part NO. 3T-7376 / 3T7376 CHANNEL ASSEM.- / -1YNY---
80307571OEM Part NO. 030-7571 / 0307571 BOLT (3/8-16X1.0IN)- / -4YNY--3/8-16X1-IN
99G1240OEM Part NO. 9G-1240 / 9G1240 SEAL- / -1YYY---
105P8161OEM Part NO. 5P-8161 / 5P8161 FILM (MOUNTED ON R.H. OPERATOR''S PLATFORM)- / -1YYY--MOUNTED ON RH
117T6763OEM Part NO. 7T-6763 / 7T6763 LEVER- / -1YNY--DOZER CONTROL
129W4262OEM Part NO. 9W-4262 / 9W4262 HANDLE- / -1YNY---
138T0741OEM Part NO. 8T-0741 / 8T0741 SEAL-LIP TYPE- / -10YYY--15.88MM ID
144J3044OEM Part NO. 4J-3044 / 4J3044 BEARING AS-NEEDLE- / -6NYY----TO SHAFT AND VALVE
158T2502OEM Part NO. 8T-2502 / 8T2502 BOLT (3/8-16X1.125IN)- / -2YNY--3/8-16X1.125-IN
167T1099OEM Part NO. 7T-1099 / 7T1099 LINK- / -1YNY--LINK
173S2713OEM Part NO. 3S-2713 / 3S2713 NUT-FULL-STRAPS & BRACKETS- / -2YNY--3/8-24-THD
186V8183OEM Part NO. 6V-8183 / 6V8183 NUT-FULL (3/8 X 24 THD)- / -4YNY--3/8-24
195D8935OEM Part NO. 5D-8935 / 5D8935 ROD-CONTROL- / -1YNY---
204Y1680SHAFT ASSEM.- / -1YNY---
214Y0873BRACKET- / -1YNY---
226T8105OEM Part NO. 6T-8105 / 6T8105 PLATE ASSEM.- / -1YNY---
237G1820OEM Part NO. 7G-1820 / 7G1820 LEVER- / -1YNY---
246T8106OEM Part NO. 6T-8106 / 6T8106 SHAFT-GOVERNOR CONTROL- / -1YNY---
253T7368OEM Part NO. 3T-7368 / 3T7368 BRACKET- / -1YNY---
266T8161OEM Part NO. 6T-8161 / 6T8161 PLATE- / -1YNY---
276T8109OEM Part NO. 6T-8109 / 6T8109 LEVER- / -1YNY---
286V8801OEM Part NO. 6V-8801 / 6V8801 NUT (BRACKET TO RADIATOR GUARD)- / -2YNY--3/8-16-THD
293T7844OEM Part NO. 3T-7844 / 3T7844 ROD ASSEM.- / -1YNY---
303T9346OEM Part NO. 3T-9346 / 3T9346 SHAFT AS- / -1YNY---
318M6251OEM Part NO. 8M-6251 / 8M6251 ROD- / -1YNY---
326T5620OEM Part NO. 6T-5620 / 6T5620 LEVER- / -1YNY---
331022913OEM Part NO. 102-2913 / 1022913 FILM (INSTRUCTION)- / -1YYY--BULLDOZER CONTROL
343T9350OEM Part NO. 3T-9350 / 3T9350 LEVER- / -1YNY--DOZER CONTROL
354D8913OEM Part NO. 4D-8913 / 4D8913 LEVER- / -1YNY---
368T6973OEM Part NO. 8T-6973 / 8T6973 BOLT (7/16)- / -2YNY--7/16-14X1.125-IN
370S1591OEM Part NO. 0S-1591 / 0S1591 BOLT--BETWEEN CASE AND REAR SUPPORT OF LOADER FRAME- / -2YNY--3.81CM 1.5IN LG
385P1075OEM Part NO. 5P-1075 / 5P1075 WASHER (Plate to top of Front Bracket)- / -4YNY--10.2X22.5X3-MM THK
392K0400OEM Part NO. 2K-0400 / 2K0400 ROD END (ON RIGHT SIDE OF ROD ASSEM.)- / -2YYY--END
401B8704OEM Part NO. 1B-8704 / 1B8704 KEY (625" LONG)- / -2YYY--KEY ADAPTER TO COMPRESSION RELEASE SHAFT
414D4064OEM Part NO. 4D-4064 / 4D4064 ROD END- / -3YYY--3/8-24-THD
425J5315OEM Part NO. 5J-5315 / 5J5315 ROD END 9.52mm(.375 in.)thread- / -1YYY--9.52MM .375IN THD.
431B0676OEM Part NO. 1B-0676 / 1B0676 PIN-CLEVIS- / -2YNY--CLEVIS
442A1736OEM Part NO. 2A-1736 / 2A1736 GEAR SHIFT LEVER HANDLE- / -1YYY--RIPPER CONTROL
452K4973OEM Part NO. 2K-4973 / 2K4973 LOCKNUT-INSIDE GUARD ASSEMBLY- / -5YYY--3/8-16-THD
465P8244OEM Part NO. 5P-8244 / 5P8244 WASHER--GENERATOR TO ENGINE- / -2YYY--12X22.5X2.5-MM THK
470S1594OEM Part NO. 0S-1594 / 0S1594 BOLT--FASTENING OF 1V3461 PLATE ASSEM. TO THE KICKPLATE- / -4YNY--3/8-16X1IN
489F2978OEM Part NO. 9F-2978 / 9F2978 NUT 5T2711 BRACKET TO LH RADIATOR GUARD- / -4YNY--3/8-16-THD
494L9337OEM Part NO. 4L-9337 / 4L9337 BOLT 3.81 mm(1.50 in.) long- / -2YNY--3/8-16X1.5-IN
500S1571OEM Part NO. 0S-1571 / 0S1571 BOLT 4.44 cm(1.75 in.) long Location "C" - Left Head- / -5YNY--4.45CM 1.75IN LG
511A2029OEM Part NO. 1A-2029 / 1A2029 BOLT (1-1/8") TUBE ASSEMBLY TO TRANSFER DRIVE CASE- / -2YNY--1.125IN 28.58MM LONG
525M2894OEM Part NO. 5M-2894 / 5M2894 WASHER CLIP TO TUBE ASSEMBLY (AFTERCOOLER RADIATOR INLET)- / -7YYY--9.9MM .391IN ID
533B4615OEM Part NO. 3B-4615 / 3B4615 COTTER TO 1A8827 PIN- / -2YYY--COTTER
541B4203OEM Part NO. 1B-4203 / 1B4203 NUT SUPPORT TO STARTING ENGINE CYLINDER BLOCK- / -2YNY--3/8-24 THD
554F8965OEM Part NO. 4F-8965 / 4F8965 BOLT BRACKET TO STARTING ENGINE- / -2YNY--7/16-14X1.125-IN
568T5360OEM Part NO. 8T-5360 / 8T5360 WASHER-HARD (22.5MM OD)- / -2YYY--12X22.5X2.5-MM THK
578T2637OEM Part NO. 8T-2637 / 8T2637 PIN-SPRING- / -1YYY---
583T9351OEM Part NO. 3T-9351 / 3T9351 SHAFT-GOVERNOR CONTROL- / -1YNY---
593T9345OEM Part NO. 3T-9345 / 3T9345 BRACKET- / -1YNY---
605S7379OEM Part NO. 5S-7379 / 5S7379 BOLT (PLATE AS TO PLATFORM)- / -2YNY--3/8-16X0.875-IN
619S8752OEM Part NO. 9S-8752 / 9S8752 NUT 8.33mm(.328 in.)thick- / -2YNY--3/8-16-THD
628T4896OEM Part NO. 8T-4896 / 8T4896 WASHER (FOR TILT PORTS ON VALVE)- / -3YYY--10.2X18.5X2.5-MM THK
634L6454OEM Part NO. 4L-6454 / 4L6454 BOLT (BRACKET TO RADIATOR GUARD)- / -6YNY--3/8-16X1-IN
640L1351OEM Part NO. 0L-1351 / 0L1351 BOLT STARTING ENGINE FUEL TANK BRACKET TO DIESEL INTAKE MANIFOLD- / -2YNY--3/8-16X.875IN
655S7383OEM Part NO. 5S-7383 / 5S7383 BOLT (3/8 X 16 X 1.75IN)- / -5YNY--3/8-16X1.75-IN
666P5209OEM Part NO. 6P-5209 / 6P5209 COVER- / -1YNY---
676P5208OEM Part NO. 6P-5208 / 6P5208 GUIDE-CONTROL- / -1YYY---
684B1291OEM Part NO. 4B-1291 / 4B1291 SCREW-MACHINE- / -4YNY--3/8-16
692L6267OEM Part NO. 2L-6267 / 2L6267 NUT SELFLOCKING- / -1YYY--3/8-24-THD
702J7295OEM Part NO. 2J-7295 / 2J7295 SPRING --TO WINCH CONTROL LEVER- / -1YYY--SPRING--TO WINCH CONTROL LEVER
717L0811OEM Part NO. 7L-0811 / 7L0811 PIN (SPRING)- / -1YNY--LONG
726P5207OEM Part NO. 6P-5207 / 6P5207 SEAL (domed)- / -1YYY--DOMED

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

16T7984OEM Part NO. 6T-7984 / 6T7984 IMPLEMENT LINKAGE GROUP (RIPPER)- / -1YNYNIRIPPER
26T7983OEM Part NO. 6T-7983 / 6T7983 IMPLEMENT LINKAGE GROUP (BULLDOZER AND TILT)- / -1YNYNIBULLDOZER AND RIPPER
36T7765OEM Part NO. 6T-7765 / 6T7765 RIPPER LINES GROUP- / -1YNYNI-
44T0949OEM Part NO. 4T-0949 / 4T0949 VALVE GROUP--UNIT TEST- / -1YYYNIBULLDOZER, TILT AND LIFT

Part NO. 6T7983 suitable for:

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

14Y3380OEM Part NO. 4Y-3380 / 4Y3380 HYDRAULIC CONTROL ARRANGEMENT- / -1---NL-
23T3628OEM Part NO. 3T-3628 / 3T3628 CONTROL AR-HYDRAULIC- / -1---NL-

Parts EPC Caterpillar Parts Hydraulic System